125 results found for MIL-STD-883
Reference
Title
Source
Type / Subtype
Date
Issue / Rev
Status
Method 2008 is canceled effective 15 November 1974
DLA
Method
1 /
Supersed
The variable frequency vibration test is performed for the purpose of determining the effect on component parts of vibration in the specified frequency range. This is...
DLA
Method
3 /
Active
This test is proposed as an accelerated laboratory corrosion test simulating the effects of seacoast atmosphere on devices and package elements.
DLA
Method
8 /
Active
This method establishes the means for measuring the output transition times of digital microelectronic devices, such as TTL, DTL, RTL, ECL, and MOS.
DLA
Method
1 /
Active
This method establishes the procedure for measuring the ground bounce (and VCC bounce) noise in digital microelectronic devices or to determine compliance with...
DLA
Method
/
Active
total dose test of the HS-OP470ARH.Parts were tested at low and high dose rate under biased and unbiased conditions as outlined in MIL-STD-883 Test Method 1019.7,to a...
TD
/ 0
Active
The purpose of this test is to verify that the amount of Lead (Pb) in Tin-Lead (Sn-Pb) alloys and electroplated finishes contain at least 3 weight percent (wt%) Lead...
DLA
Method
/
Active
The purpose of this test is to determine the strength of the element attachment system when subjected to force in the Y1 axis. This method is applicable to...
DLA
Method
2 /
Active
The purpose of this test is to detect loose particles inside a device cavity. The test provides a nondestructive means of identifying those devices containing...
DLA
Method
9 /
Active
The purpose of this test procedure is to measure small signal power gain and the noise figure of an amplifier.
DLA
Method
2 /
Active