103 results found for MIL-STD-883 TM1019
Reference
Title
Source
Type / Subtype
Date
Issue / Rev
Status
Parts were tested at low and high dose rate under biased and unbiased conditions at 0.01 rad(Si)/s and 65 rad(Si)/s respectively. The low dose rate test was run to 50...
TD
/ 0.00
Active
Parts were tested at low and high dose rates under biased and unbiased conditions at 0.01rad(Si)s and 50rad(Si)/s, respectively. The LDR tests were run to 150krad(Si)...
TD
1 /
Active
DLA
Detail / Drawing
F / -
Active
The ISL71091SEHxx showed good performance over low and high dose rate irradiation. All samples passed the post-irradiation specifications at the total dose levels...
TD
/ 0.00
Active
The ISL71091SEHxx showed good performance over low and high dose rate irradiation. All samples passed the post-irradiation specifications at the total dose levels...
TD
/ 0.00
Active
Parts were tested at LDR and HDR under biased and unbiased conditions. HDR testing is complete through 150krad(Si) and subsequent high temperature biased anneal. The...
TD
/ 1
Active
Parts were tested at LDR and HDR under biased and unbiased conditions. HDR testing is complete through 150krad(Si) and subsequent high temperature biased anneal. The...
TD
/ 1
Active
Parts were irradiated under bias and with all pins grounded at LDR and HDR at 0.01rad(Si)/s and 71.9rad(Si)/s respectively. All irradiations were followed by a high...
TD
/ 1.00
Active
Parts were tested at low and high dose rate under biased and unbiased conditions at 0.01 rad(Si)/s and 65 rad(Si)/s respectively. The low dose rate test was run to 50...
TD
/ 0.00
Active
The HS-2420RH was acceptance tested on a at high dose rate (50–300 rad(Si)/s) only and to 50krad(Si) at low dose rate (0.01rad(Si)/s).
TD
/ 0.00
Active