40 results found for MIL-STD-202
Reference
Title
Source
Type / Subtype
Date
Issue / Rev
Status
The purpose of the contact resistance test is to determine the resistance offered to a flow of current during its passage between the electrical contacting surfaces of...
DLA
Method
/
Active
The barometric pressure test is performed under conditions simulating the low atmospheric pressure encountered in the nonpressurized portions of aircraft and other...
DLA
Method
/
Active
The random-drop test is used to determine the effects on component parts of random, repeated impact due to handling, shipping, and other field service conditions.
DLA
Method
/ w/Change 1
Active
This test is conducted for the purpose of determining electrical contact reliability under low-level switching conditions in the environment in which the contacts...
DLA
Method
/
Active
The purpose of this test method is to determine the effectiveness of the seal of a component part which has an internal cavity which is either evacuated or contains...
DLA
Method
/
Active
The purpose of this test is to measure the capacitance of component parts. Preferred test frequencies for this measurement are 60 Hz, 100 Hz, 120 Hz, 1 kHz, 100 kHz,...
DLA
Method
/
Active
This test is performed to evaluate the properties of materials used in components as they are influenced by the absorption and diffusion of moisture and moisture vapor.
DLA
Method
/
Active
The salt atmosphere test, in which specimens are subjected to a fine mist of salt solution, has several useful purposes when utilized with full recognition of its...
DLA
Method
/
Active
This resistor noise test method is performed for the purpose of establishing the "noisiness" or "noise quality" of a resistor in order to determine its suitability for...
DLA
Method
/
Active
This test is conducted for the purpose of determining the electrical contact reliability of such items as electromechanical relays, switches, etc., under intermediate...
DLA
Method
/
Active