40 results found for MIL-STD-202
Reference
Title
Source
Type / Subtype
Date
Issue / Rev
Status
The barometric pressure test is performed under conditions simulating the low atmospheric pressure encountered in the nonpressurized portions of aircraft and other...
DLA
Method
/
Active
The random-drop test is used to determine the effects on component parts of random, repeated impact due to handling, shipping, and other field service conditions.
DLA
Method
/ w/Change 1
Active
The high frequency vibration test is performed for the purpose of determining the effect on component parts of vibration in the frequency ranges of 10 to 500 hertz...
DLA
Method
/
Active
This test is conducted for the purpose of determining the suitability of component parts and subassemblies of electrical and electronic components when subjected to...
DLA
Method
/
Active
The moisture resistance test is performed for the purpose of evaluating, in an accelerated manner, the resistance of component parts and constituent materials to the...
DLA
Method
/
Active
To verify that markings or color coding will not become illegible or discolored on the parts (including printed wiring boards) when subjected to solvents and processes...
DLA
Method
/ w/Change 1
Active
This test is performed for the purpose of determining the flammability of a part exposed to an external flame. Flammability is defined as the ability of a part to...
DLA
Method
/
Active
This test is performed to determine the effectiveness of the seal of component parts. The immersion of the part under evaluation into liquid at widely different...
DLA
Method
/
Active
This test is performed for the purpose of determining the ability of various parts to withstand shock of the same severity as that produced by underwater explosions,...
DLA
Method
/
Active
The purpose of this test is to measure the direct-current (dc) resistance of resistors, electromagnetic windings of components, and conductors. It is not intended that...
DLA
Method
/
Active