40 results found for MIL-STD-202
Reference
Title
Source
Type / Subtype
Date
Issue / Rev
Status
The purpose of this test method is to determine the effectiveness of the seal of a component part which has an internal cavity which is either evacuated or contains...
DLA
Method
/
Active
This test is conducted for the purpose of detecting contact-chatter in electrical and electronic component parts having movable electrical contacts, such as relays,...
DLA
Method
/
Active
The purpose of this test is to detect the presence of free moving particulate contaminants within sealed cavity devices. This test method is specifically directed...
DLA
Method
/
Active
This test is performed to determine whether wire and other component parts can withstand the effects of the heat to which they will be subjected during the soldering...
DLA
Method
/
Active
This test determines the ability of component parts and subassemblies of electrical and electronic components to withstand shocks.
DLA
Method
/
Cancelled
This test is performed for the purpose of determining the effects of acceleration stress on component parts, and to verify the ability of the component parts to...
DLA
Method
/
Active
Radiographic inspection is generally a nondestructive (see 1.2) method for detecting internal physical defects in small component parts which are not otherwise visible.
DLA
Method
A /
Active
The barometric pressure test is performed under conditions simulating the low atmospheric pressure encountered in the nonpressurized portions of aircraft and other...
DLA
Method
/
Active
The random-drop test is used to determine the effects on component parts of random, repeated impact due to handling, shipping, and other field service conditions.
DLA
Method
/ w/Change 1
Active
The high frequency vibration test is performed for the purpose of determining the effect on component parts of vibration in the frequency ranges of 10 to 500 hertz...
DLA
Method
/
Active