Compact Current-Compensated Ring Core Chokes

Posted by doEEEt Media Group
On March 24, 2021
0

These chokes are available in three sizes with current handling capacities between 10 A and 17 A, and with a rated voltage of 250 V AC (50/60 Hz). Depending on the type, the inductance value is between 1.0 mH and 6.25 mH. The plastic material of the base plate and spacer in the middle of the ring core conforms with UL 94 V-0, and the highest CTI value of >600.

EEE Components, PASSIVES

TDK Extended Range of Axial Hybrid-Polymer Aluminum Electrolytic Capacitors

Posted by doEEEt Media Group
On March 17, 2021
0

TDK Corporation has extended its product range of hybrid-polymer aluminum electrolytic capacitors and now offers two series with an axial design. The B40600* / B40700* series is designed for rated voltages of 25 V and 35 V.

EEE Components, PASSIVES

New Snap-in Aluminum Capacitors with Outstanding Ripple Current Capability

Posted by doEEEt Media Group
On March 11, 2021
0

TDK Corporation presents the new EPCOS aluminum electrolytic capacitor series B43548* with snap-in terminals. The capacitors feature an excellent maximum ripple current capability of 9.80 A (400 V, 100 Hz, 60 °C). This makes them ideal for demanding applications in power electronics.

EEE Components, PASSIVES

TDK Releases Failsafe Chip Varistors for Surge Protection of Automotive Battery

Posted by doEEEt Media Group
On March 10, 2021
0

…

ACTIVES, EEE Components, PASSIVES

TDK Introduces PTC Inrush Current Limiters Selection Tool

Posted by doEEEt Media Group
On March 10, 2021
0

The selection process is divided into four stages: After specifying the circuit structure and the capacitor bank’s total capacitance, the developer must then enter the charging voltage and the maximum ambient temperature of the PTC inrush current limiter. After this has been done, the tool displays a list of suitable components for the user, and if a parallel connection is required, the number of components required is also shown.

EEE Components, PASSIVES

TDK Develops Low-Resistance Multilayer Ferrite Inductors for NFC

Posted by doEEEt Media Group
On March 10, 2021
0

The inductors’ intended use is for the LC filters of NFC circuits. It is necessary for inductors to have narrow tolerances to minimize the loss caused by mismatched impedance with the antenna. TDK offers this line of inductors featuring a tolerance of ±5% to meet this need. In addition, it is important to control inductor loss at the 13.56 MHz communication frequency to prevent the reduction of antenna output power.

EEE Components, PASSIVES

TDK Releases the World’s First Reverse Geometry MLCCs

Posted by doEEEt Media Group
On March 6, 2021
0

TDK Corporation has developed the new CGAE series, the world’s first flip-type, reverse geometry MLCCs in 0510 design (EIA 0204) with capacitances of up to 1 µF, for automotive applications*. Depending on their capacitance, the capacitors are designed for rated voltages of between 4 V and 50 V and they cover a capacitance range from 47 nF to 1 µF.

EEE Components, PASSIVES

AEC-Q200 SMD Compact Transformers for DC/DC Converters

Posted by doEEEt Media Group
On February 17, 2021
0

TDK Corporation presents the EPCOS E10 EM series, a new range of insulated SMT transformers that are suitable for various DC/DC converter topologies and gate driver circuits in e-mobility and industrial electronics.

EEE Components, PASSIVES

Passive components leadtime reduction

Posted by doEEEt Media Group
On January 6, 2021
0

Many passive components suppliers are lowering quarterly forecasts, one effect of slowing sales has been an easing of severe shortages. for many passive components.

EEE Components, PASSIVES

EMC Noise Suppression Filters for In-Vehicle PoC

Posted by doEEEt Media Group
On January 4, 2021
0

TDK Corporation announces the launch of the MDF1005 series of noise suppression filters for in-vehicle PoC, used in applications such as ADAS circuits, BUS lines, telematics units, and more. Mass production will begin in December 2020.

Page 3 of 7‹1 234 5 ›»