KEMET Introduced New Tantalum Polymer Ultra-Thin

Posted by doEEEt Media Group
On January 4, 2021
0

The tantalum polymer SMD are solid-state capacitors that demonstrate no wear out mechanism when operated within their recommended guidelines. Unlike their MnO2 counterparts, polymer capacitors don’t need to be derated as aggressively. Under most conditions of consumer electronics devices, polymer capacitors only need about 10% derating.

EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, PASSIVES, TESTING

ESR Degradation in Polymer Tantalum Capacitors during Hi Temp Storage

Posted by doEEEt Media Group
On December 27, 2020
0

Different types of polymer capacitors from three manufacturers have been stored at temperatures from 100 ºC for periods up to 18,500 hours to 175 ºC for up to 2000 hours.

EEE Components, PASSIVES

A highly scalable polymer nanomaterial filled dielectric

Posted by doEEEt Media Group
On December 24, 2020
0

A highly scalable polymer nanomaterial filled dielectric with superior capacitor performance over a broad temperature

EEE Components, PASSIVES

New conductive polymer hybrid aluminun electrolitic capacitors

Posted by doEEEt Media Group
On December 18, 2020
0

Panasonic will launch mass production of large-capacitance conductive polymer hybrid aluminum electrolytic capacitors, which will enable a reduction in the number of capacitors necessary and compact size

EEE Components, PASSIVES

Replacing MLCCs with polymer capacitors

Posted by doEEEt Media Group
On December 7, 2020
0

With the continuing supply shortage for multi-layer ceramic capacitors (MLCCs), designers are being forced to consider alternatives. In this article, we will look at the factors to be considered if you’re thinking about using polymer capacitors as a replacement. There has been a supply shortage of MLCCs since the end of 2016 and there are no signs of immediate improvement.

EEE Components, PASSIVES

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors

Posted by doEEEt Media Group
On December 2, 2020
0

Panasonic Corporation announced today that its Industrial Solutions Company has commercialized new conductive polymer hybrid aluminum electrolytic capacitors, the large-current ZU series, and large-capacitance ZSU series for use in automotive ECUs (electronic control units)

EEE Components, PASSIVES

Hybrid Aluminum Polymer Capacitor Technology

Posted by Kemet Electronic Corporation
On December 2, 2020
0

KEMET, a subsidiary of Yageo Corporation (“Yageo”) (TAIEX: 2327) and leading global supplier of electronic components, announces the launch of three hybrid aluminum polymer capacitor series: A780, PHA225, and PHH225. These AEC-Q200 qualified capacitors offer a combination of highly conductive polymer technology and liquid electrolytic material in a hybrid design

EEE Components, PASSIVES

Automotive Grade Polymer Solutions for Avionics and Automotive Applications

Posted by Kemet Electronic Corporation
On November 10, 2020
0

This series fulfills the growing need for increased reliability of tantalum polymer capacitors beyond currently available commercial grade solutions for both commercial avionic applications and automotive applications, such as advanced driver-assistance systems (ADAS).

EEE Components, PASSIVES

Niobium and Niobium Oxide Capacitors Overview

Posted by Tomáš Zedníček
On November 1, 2020
0

Niobium-based capacitors present a niche capacitor market share within the tantalum capacitor industry. High safety, no short circuit failure mode under standard operating conditions and high reliability

EEE Components, PASSIVES

New High Ripple Current Series of Conductive Polymer Hybrid Aluminum Electrolytic Capacitors

Posted by doEEEt Media Group
On October 26, 2020
0

Panasonic has released new automotive AECQ-200 high ripple current ZT series V type conductive polymer hybrid aluminum electrolytic capacitors robust to lead-free reflow high-temperature board mounting.

Page 3 of 7‹1 234 5 ›»