Lunar Regolith Test onto COTS Optoelectronics

Posted by Juan Moreno Echarri
On January 18, 2023
0

Introducing the usage in planetary exploration as illumination of surface in robotic lunar exploration needs new testing techniques. Commercial LEDs are available in many packages, most SMD mounting and, in many cases, finished with a silicone glob top. The degradation caused by lunar regolith exposure onto all these options is unknown and shall be assessed by testing.

COTS components

Q&A Webinar – Challenges of Testing of Optoelectronics COTS for Space

Posted by doEEEt Media Group
On January 10, 2023
0

Answer & Questions Webinar – Challenges of Testing of Optoelectronics COTS for Space Many participants attended the webinar and asked our speaker a few questions. In this post, you will find all the answers.

WEBINAR

Challenges of Testing of Optoelectronics COTS for Space

Posted by doEEEt Media Group
On October 27, 2022
0

The capabilities of COTS optoelectronics are increasing at the pace of the terrestrial industry, this webinar will give real examples that are being tested today in the different factors that occurring

ACTIVES, EEE Components

Optocoupler Specifications for circuit design

Posted by Emilio Cano García
On March 16, 2022
0

Optocoupler provided isolation between circuits that need to have interaction in between. To make a good circuit design, we have to know all about the main parameters of an optocoupler and understand the specification.

ACTIVES, EEE Components

What is an optocoupler? Uses and benefits

Posted by Emilio Cano García
On February 23, 2022
0

An optocoupler, also known as an optoisolator or photocoupler, is an electronic device made up of an LED emitter combined with a photodetector, separated from each other in proximity. There are many types of photodetectors, most of which are variations on a photodiode or phototransistor.

ACTIVES, EEE Components

Isolation in DC using phototransistor output optocouplers

Posted by Javier Alejandro de la Ossa Fernández
On February 22, 2022
0

Optocouplers typically provide 2500 volts (rms) isolation, 1012 Ω insulation resistance, and less than a picofarad coupling between input and output. And optocouplers are available in many different packages and configurations.

ACTIVES, EEE Components

Electronic components for motor vehicles: the solution in New Space?

Posted by Demetrio López
On September 16, 2021
0

There are well-known advantages to using these photonic technologies in space, such as the limited generation of noise, electromagnetic immunity,

EEE Components, PASSIVES

Stackpole Releases 2817 Size 5 W Current Sense Chip Resistor

Posted by doEEEt Media Group
On July 17, 2021
0

Stackpole’s CSRF2817 foil on ceramic current sensing chip resistor offers a power rating of up to five watts and resistance values of five, six, eight, ten, 15, 20 and 33 milliohm. TCR for these values is 50 ppm and available tolerances are one and five percent.

EEE Components, PASSIVES

Signal Transformer is Releasing New Safety Extra Low Voltage Lighting Transformers

Posted by doEEEt Media Group
On June 24, 2021
0

Signal Transformer, a Bel group company and global manufacturer of custom and standard transformers, chassis and high-frequency chokes and inductors, SMD inductors and wireless charging coils, announce their latest product offering for the lighting industry, the Lighting Transformer (LT) Series.

EEE Components, PASSIVES

Bourns Announces New 01005-Size Thick Film Chip Resistor Series

Posted by doEEEt Media Group
On June 24, 2021
0

This new chip resistor is made using a thick film element printed onto a ceramic substrate and complements the other circuit conditioning components that Bourns offers such as power inductors and rectifier diodes.

Page 1 of 212