KEMET’s AEC-Q200 qualified MPXV power inductors to have a metal composite core that provides stable inductance at high current levels. Inductance is also stable across a wide temperature range, with MPXV inductors rated for operation at up to 155°C, making them ideal for all kinds of automotive ECU applications.

MPXV inductors are available...

EEE Components, PASSIVES

Vishay Introduces Low Profile Automotive Dual Inductor

Posted by doEEEt Media Group
On September 7, 2020
0

Designed to replace the two inductors required in an automotive Class D audio amplifier with a single device, the Vishay Dale IHLD-2525GG-5A reduces board space requirements and component counts, while providing improved THD performance over other inductor types.

ACTIVES, EEE Components, PASSIVES

Vehicle electrical systems:Zero-to-sixty in 48 volts

Posted by doEEEt Media Group
On September 5, 2020
0

Capacitors should feature low ESR values to accommodate higher ripple currents and incur lower losses, and should be rated at voltages of 25 V, 40 V (for 12-V systems) and 63 V (for 48-V systems

EEE Components, PASSIVES

Combining Capacitors and Inductors into Tiny 3D Rolled Membrane

Posted by doEEEt Media Group
On August 24, 2020
0

Urbana-Champaign have devised a method of combining capacitors and inductors in a tiny, 3D rolled membrane. This will save space in the electronic filters found in phones and other wireless devices.

EEE Components, PASSIVES

Solenoids, Contactors and Electromechanical Relays Explained

Posted by doEEEt Media Group
On August 24, 2020
1

Solenoid and relay conjure visions of an ancient electromechanical world now replaced by all-electronic devices, smart motors, and more. That almost makes sense, as these two components in various forms have been with us for over 150 years. But don’t be fooled: Both are still indispensable devices … and remain viable choices for the conversion of electrical energy to mechanical motion (in the case of solenoids) or where a signal must control the on-off path of one or more other signals (in the case of relays).

EEE Components, PASSIVES

Bourns Introduces AEC-Q200 Compliant CANbus Inductor Series

Posted by doEEEt Media Group
On August 10, 2020
0

Bourns, Inc., introduced a new CANbus Common Mode Chip Inductor series. The new AEC-Q200 compliant inductors feature a ferrite core with a bifilar-wound construction that provides high impedance over a broad frequency range to suppress unwanted incoming or outgoing EMI signals.

EEE Components, PASSIVES

Pulse Expands its Range of Ultra-low DCR Power Bead Inductors for Computing & Storage

Posted by doEEEt Media Group
On August 7, 2020
0

Pulse expands its range of power bead inductors with the introduction of six new platform sizes designed for the latest multi-phase and PoL architectures for server, graphics and high power FPGAs. The latest platforms have ultra-low DCR, low loss ferrite cores and an optimized structure to ensure that they offer the highest efficiency and enable maximum power density.

Page 13 of 19«‹11 121314 15 ›»