Optoelectronics, Optoelectronics Components Testing

Reliability considerations on Photonics parts for New Space Applications

Posted by Javier Alejandro de la Ossa Fernández
On January 30, 2020
0

NewSpace is an approach that focuses on lowering the barriers to entry to space industry, by providing cheaper access to space… One of the major characteristics of the NewSpace era is the fundamental shift from an industry which was heavily dependent on government agencies to a more agile and an independent private sector that relies on innovation, working with much smaller budgets than the early space industry.

INSPECTION, ELECTRICAL & VERIFICATION, TESTING

High Rel Principles and Verifications in Solid Tantalum Capacitors

Posted by Kemet Electronic Corporation
On October 2, 2019
0

Typical short circuit failure mode in Tantalum capacitors can lead to significant damage to the adjacent circuit board, and 50%voltage de-rating alone is not sufficient to address this problem.

EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, INSPECTION, ELECTRICAL & VERIFICATION, PASSIVES

Vishay Precision Group Resistors Cryogenic capabilities demonstration

Posted by Manuel Sánchez Ruiz
On September 21, 2019
2

Components for space applications are subject to extreme temperatures, It is important to have enough data so that customers are confident to use parts in these cryogenic applications

ENDURANCE, ENVIRONMENTAL & RADIATION, INSPECTION, ELECTRICAL & VERIFICATION, TESTING

Cryogenic Testing of EEE & Electro-Optical components

Posted by Enrique Cordero
On September 21, 2019
0

Electrical and materials performance of EEE components and Electro-optical components are critical in some planetary missions. Cryogenic Temperatures and pressure conditions are just an example of these extreme environmental conditions that can be face the components

INSPECTION, ELECTRICAL & VERIFICATION, PHYSICAL, MECHANICAL & ASSEMBLY, TESTING

Reasons to do an Element Evaluation Procedure of EEE Parts

Posted by doEEEt Media Group
On March 14, 2019
1

Element evaluation is performed on a sample of randomly selected parts from a production lot, (if die, they are assembled into packages). These parts are then subjected to a series of tests selected to verify the reliability of the parts (Electrical, screening, environmental, endurance and mechanical tests) and the production lot from which they originated. The Element Evaluation is performed to show that the parts performance, materials and manufacturing processes are able to meet their specified electrical, mechanical and physical performance characteristics for which they were designed-and as a result, their suitability for use in the application in which they are intended to be used.

Page 2 of 212