EEE Components, ENGINEERING AND PROJECT MANAGEMENT SUPPORT

PRODUCT ASSURANCE (PA) Support: What is and why it is important

Posted by Manuel Sánchez Ruiz
On September 28, 2020
0

Product Assurance (PA) stands as a fundamental pillar. Product Assurance can be defined as the set of requirements that materials, processes and parts must comply to assure proper performance of the equipment during the mission lifetime. These rules are gathered in a PA Plan.

EEE Components, MANUFACTURER NOTIFICATION, PASSIVES

Shipment Release Notification, Vishay Military Type RNR55 Resistors, MIL-PRF-55182

Posted by Emilio Cano García
On September 21, 2020
0

The shipment release is for RNR55, Vishay models HDN55, Characteristic “C” and “E”, resistance values 10 ohms thru 1.21 meg-ohms; tolerances B, D, and F Life Failure rate C, M, P, R, and S.

EEE Components, INSPECTION, ELECTRICAL & VERIFICATION

Idiosyncrasy of International Space Markets

Posted by Jose Luis Alvarez de Cienfuegos Gálvez
On August 30, 2020
0

IDIOSYNCRASY OF INTERNATIONAL SPACE MARKETS Six decades have passed since the launch of the first artificial satellite by the USSR (Sputnik) and five decades since the landing of human beings on the Moon (Apollo project -USA-), two of the greatest landmarks of the space race that began in the shadow of the “Cold War” between the US and the USSR. After the conquest of the new world in the 16th century, this is considered a new turning point in the history of humanity that leads some authors to claim it as the beginning of a new period of history: The Space Age.

EEE Components, PASSIVES

Temperature Measurement and Silicon-Based Temperature Sensors

Posted by doEEEt Media Group
On August 10, 2020
0

Würth Elektronik Webinar for Industrial Applications

This webinar shows trends in temperature measurement. The different technology approaches of temperature sensors are shown.

In the further course, the focus will be on silicon-based temperature sensors with a digital interface.

In this context, the essential features of the new temperature sensor WSEN-TIDS from Würth Elektronik...

EEE Components, PASSIVES

Exxelia Unveils Two Brand New High Temperature Film Capacitors Series Operating up to 200°C

Posted by doEEEt Media Group
On August 5, 2020
0

Exxelia, an established designer and manufacturer of complex passive components, resistors & sub-systems dedicated to harsh environments, launches its new 253P & 560P product series providing unmatched performances at high temperature.

EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, MANUFACTURER NOTIFICATION, PASSIVES, TESTING

Updated: Shipment Hold Notification, Vishay Military type RNR55 resistors, MIL-PRF-55182

Posted by Emilio Cano García
On June 9, 2020
0

Shipment Hold Notification- Mil-PRF-55182, VISHAY Style HDN55, Military type RNR55, Columbus, Nebraska Product

ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

What is a Life Test in a Electronic Components?

Posted by Javier Galnares
On June 6, 2020
0

Life test is an electrical stress test that typically employs voltage and/or temperature to accelerate the appearance of wear-out reliability failures in a device. The objective of life testing is to evaluate whether failures caused by wear-out are likely to occur during the product lifetime and thus to estimate compliance of the device with the long-term reliability requirements

ACTIVES, EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, PHYSICAL, MECHANICAL & ASSEMBLY, TESTING

Hermetic Packages in Space Environment

Posted by Javier Alejandro de la Ossa Fernández
On February 27, 2020
0

The general specification for hybrid microcircuits (MIL-PRF-38534) details the qualification and testing requirements for non-hermetic packages for military and space applications, and the MIL-PRF-38535 proposed class Y monolithic microcircuits for non-hermetic space level.

ALTER Laboratory Services, ENDURANCE, ENVIRONMENTAL & RADIATION

Burn-in Test Features

Posted by Antonio Amigo
On February 14, 2020
0

Is an electrical stress test that typically employs voltage and/or temperature to accelerate the appearance of latent reliability defects in a device. The objective of burn-in is to eliminate all potential failure likely to occur at the early phase of the product life time (also called Infant Mortality Failure). It can easily be observed in a typical reliability bath tub curve as shown below.

ALTER Innovation, ENDURANCE, ENVIRONMENTAL & RADIATION

Extreme Temperature Characterization of Passive Components

Posted by doEEEt Media Group
On February 12, 2020
0

Setup developments and some of the results obtained for the temperature characterization from -190ºC to more than +300ºC of passive components normally used for space missions,

Page 4 of 51 2 345