Design for manufacturing and assembly

Posted by Mario Rueda Aguilocho
On March 30, 2022
0

Design for manufacturing is based on design rules from manufacturing processes for both the PCB and Electronics assemblers. Some authors prefer to have separate definitions for the PCB Printed Circuit Boards manufacturing by grouping them under different names DFF, Design for Fabrication and DFA, Design for Assembly for just the electronics assembly process.

EEE Components, PASSIVES

Graphene Enables Maintenance-Free Circuit Breakers

Posted by doEEEt Media Group
On October 4, 2021
0

The Circuit Breakers Spearhead Project will see the development of cost-efficient graphene and related materials (GRM) based circuit breaker prototype, which will enable maintenance-free operation. The project aims to deliver stable performance in a wider temperature range than existing circuit breaker options.

EEE Components, PASSIVES

Varistors for Automotive Ethernet

Posted by doEEEt Media Group
On May 4, 2021
0

AVX Varistors AVX began shipping a selection of multi-layer varistors (MLV) in 1988 and entered the automotive supply chain in 2001. AVX has adopted bismuth oxide (Bi2O3)-based construction for its high reliability and has resulted in zero defective parts per million quality record since 2008. In addition, these devices meet the strict automotive quality standards (AEC-Q200, for example) and as such, are an ideal choice for protecting automotive Ethernet circuits.

EEE Components, PASSIVES

Introduction to Stretchable PCB

Posted by doEEEt Media Group
On February 11, 2021
0

Würth Elektronik Webinar

A stretchable printed circuit board, is that possible? YES! Würth Elektronik webinar will show you the new and extremely adaptable technology called STRETCH.flex.

The use of skin-friendly materials makes STRETCH.flex suitable for applications close to the body, for example. Moreover, almost any shape can be realised with it. This...

3rd PCNS Call for Papers

Posted by doEEEt Media Group
On January 26, 2021
0

3rd edition of the PCNS Passive Components Networking Days Symposium is hosted by Department of Chemistry, Materials and Chemical Engineering “Giulio Natta” and Department of Electronics, Information and Bioengineering Faculty of Politecnico di Milano.

EEE Components, INSPECTION, ELECTRICAL & VERIFICATION, PASSIVES, RF & MW, TESTING

Insertion loss and filter capacitor performance

Posted by doEEEt Media Group
On November 27, 2020
0

Capacitors are used in both analog and digital circuits to remove unwanted signals. The filtering performance of a capacitor or filtering circuit is commonly described in terms of insertion loss. Some of the factors that significantly affect the insertion loss performance of a filtering circuit include configuration of the filtering elements, impedance, and load current.

ACTIVES, EEE Components

Operational Amplifiers: Fundamentals

Posted by Javier Alejandro de la Ossa Fernández
On April 24, 2020
0

Op Amps are used in a ton of applications in electronics. They are the perfect part to compliment almost any type of analog circuit block and should be considered the starting point of their design.

EDPS 2019

Posted by doEEEt Media Group
On July 4, 2019
0

EDPS is considered a workshop. Copies of the proceedings are given to participants and posted on the web, but they are not part of the “literature.” so authors can publish the same material again at DAC, TCAD or other IEEE conferences or publications.