Cornell Dubilier Upgrade its Thinpack Energy Dense Aluminum Electrolytic Capacitors to 5,000 hrs Rated

Posted by doEEEt Media Group
On August 3, 2020
0

THA and THAS Series Thinpack aluminum electrolytic capacitors deliver the highest-energy density in a low-profile. CDE updates its spec now to 5,000hrs at rated voltage.

EEE Components, PASSIVES

Trimmer Capacitor Considerations in Practice

Posted by doEEEt Media Group
On August 3, 2020
0

Trimmer capacitors are variable components used to calibrate RF circuits during manufacturing or servicing. These components allow for variable tuning–think oscillator frequency values or rise and fall times. Should values drift over the life of the device, trimmer capacitors can be recalibrated as needed.

EEE Components, PASSIVES

Skeleton Focuses on Flexible Ultracapacitors Development

Posted by doEEEt Media Group
On August 3, 2020
0

These new types of ultracapacitors are specifically being developed for space technology because they are flexible, light and at the same time very strong. Researchers are using Curved Graphene to make bendable electrodes, which can be made into any shape.

EEE Components, PASSIVES

Researchers at RCPTM Olomouc

Posted by doEEEt Media Group
On August 3, 2020
0

Researchers at RCPTM Olomouc Developed Graphene-Based Materials Boosting Supercapacitors Energy and Power Density to the World Record Values

EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, PASSIVES, TESTING

New Whiskers Phenomena?

Posted by doEEEt Media Group
On August 1, 2020
0

Some PCBAs were submitted to a whisker test +85°C 85% RH for 200h duration and additional 2h from +85°C/85% RH-T° +25°C/50% RH 5 Cycles

EEE Components, PASSIVES

The anatomy of a water cooled capacitor

Posted by doEEEt Media Group
On July 29, 2020
0

Due to the high levels of currents that these components are exposed to, considerable amount of heat is generated. Cooling such a capacitor helps to enhance its performance as well as its reliability

EEE Components, PASSIVES

Class 1 Ceramic Dielectrics

Posted by doEEEt Media Group
On July 28, 2020
0

The performance of ceramic capacitors are greatly determined by the properties of the dielectric material. Class I dielectrics are ultra-stable and usually made of non-ferroelectric materials

EEE Components, PASSIVES

Class 2 ceramic dielectrics

Posted by doEEEt Media Group
On July 27, 2020
0

Class II dielectrics are made of ferroelectric materials. The most commonly used materials are alkaline earth titanates. Most Class II dielectrics are based on barium titanate (BaTiO3). These dielectrics exhibit less stability but higher volumetric efficiency than Class I types, and are very commonly used in electronic circuits for coupling, decoupling, bypass and frequency discrimination applications.

EEE Components, PASSIVES

Decoupling and Filtering Capacitors Guideline

Posted by doEEEt Media Group
On July 21, 2020
0

Decoupling and filtering are two of the most common uses of capacitors. It can be tempting to use the two terms interchangeably but in doing so, some of the key elements of usage can be overlooked.

ACTIVES, EEE Components, PASSIVES

EV/HEV On-board Chargers Demand Stricter Requirements

Posted by doEEEt Media Group
On July 21, 2020
0

EV/HEV On-board Chargers Demand Stricter Requirements for Safety Capacitors, also known as interference suppression capacitors, Protect Circuits and People

Page 31 of 45«‹29 303132 33 ›»