High Energy Density Aluminum Electrolytic Capacitor product line

Posted by doEEEt Media Group
On November 23, 2020
0

Exxelia, a global manufacturer of complex passive components and sub-systems dedicated to harsh environments, launches its new Innovative Aluminum Electrolytic Capacitor Felsic HC product series.

EEE Components, PASSIVES

Choosing Capacitors for Crossover Audio Circuits

Posted by doEEEt Media Group
On November 23, 2020
0

A crossover network is used to separate an audio signal into different frequency-dependent components. The separated components are then sent to specific driver circuits and speakers. The placement of this circuit can vary depending on the design of an audio system.

EEE Components, PASSIVES

High-Reliability Solid Tantalum Capacitors

Posted by doEEEt Media Group
On November 22, 2020
0

Improved manufacturing and testing technologies have enabled the success of low-ESR MnO2 tantalum capacitors in aerospace platforms, and improvements in capacitor efficiency and reliability.

EEE Components, PASSIVES

New flat aluminum electrolytic capacitors

Posted by doEEEt Media Group
On November 21, 2020
0

Aluminum electrolytic capacitors have been a mainstay in electronic power circuits for their ability to provide large bulk storage, high voltage and high energy density

ACTIVES, EEE Components, PASSIVES

Optimal Applications for Chip Varistors for ESD

Posted by doEEEt Media Group
On November 18, 2020
3

Chip varistors have both surge absorption capabilities and noise-suppressing effects. The equivalent circuit is a capacitor connected parallelly to two Zeners connected opposite to each other.

EEE Components, PASSIVES

What Do You Need to Know About Bypassing?

Posted by doEEEt Media Group
On November 17, 2020
0

The bypass capacitor is an important component in design, especially when dealing with high frequencies. Some products contain hundreds of capacitors, many of which are bypass capacitors

EEE Components, PASSIVES

Considerations to AC Rate MLCCs for Power Applications

Posted by Kemet Electronic Corporation
On November 12, 2020
0

Kemet Webinar

Designing for AC presents even more complexities and challenges compared to designing for DC. One of those challenges is choosing which components to use for AC applications to ensure a successful design.

In this webinar, KEMET’s Hernando Amezquita (Technical Product Specialist) of the Ceramics team addresses the challenges of designing for AC...

EEE Components, PASSIVES

Ultra-thin Reverse Geometry Low ESL MLCCs for In-Vehicle ADAS Applications

Posted by doEEEt Media Group
On November 12, 2020
0

Murata introduces the ultra-thin LW reversed, low equivalent series inductor (ESL) multilayer ceramic capacitor (MLCC) with a capacitance value of 1.0 µF ±20% for 4 Vdc-rated automotive applications.

EEE Components, PASSIVES

TDK Releases ModCap™ – a Modular Power Capacitor Concept for DC Link Applications

Posted by doEEEt Media Group
On November 12, 2020
0

TDK Corporation (TSE: 6762) presents ModCap™ − a modular capacitor concept for DC link applications. The newly developed power capacitors are available for rated voltages of 1100 V to 2300 V and cover a 365 µF to 2525 µF capacitance range. The rated currents between 105 A and 180 A are type-conditioned with all types designed for 5 kA recurrent pulse currents. The maximum permitted hot spot temperature is 90 °C.

EEE Components, PASSIVES

High Voltage Ceramic Capacitor Solutions

Posted by doEEEt Media Group
On November 12, 2020
0

High voltage chip capacitors are constructed to filter out electromagnetic interference (EMI) and smooth output voltages and built for applications up to 2500VDC. They are small, leadless, and can easily be placed on a PCB.

Page 21 of 45«‹19 202122 23 ›»