MLCCs for Electrostatic Discharge (ESD) Protection

Posted by doEEEt Media Group
On August 7, 2020
0

Prevention of damage to the electronic circuit can be accomplished using multiple suppression devices. Multilayer ceramic capacitors (MLCCs) are one of the solutions used to protect components from ESD damage. Since integrated circuits (ICs) are most prone to damage by ESD, MLCCs are placed close to the board connection contacts or directly next to the IC connections in order to absorb and then level the unwanted voltage spikes.

EEE Components, PASSIVES

Würth Elektronik Releases AEC-Q200 SMD Ferrite Beads with Specified Peak Current Load Ratings

Posted by doEEEt Media Group
On August 5, 2020
0

With its WE-MPSA EMI Multilayer Power Suppression Bead Würth Elektronik has now launched an entire family of ferrites for the suppression of interference pulses in automotive applications.

EEE Components, PASSIVES

KEMET Introduces Three New Series of Film Capacitors

Posted by Kemet Electronic Corporation
On August 5, 2020
0

The latest C44U-M series features a DC-Link and DC filter power film capacitor designed for high-power conversion systems applications in green energy, industrial, and energy storage systems. It supports DC networks and proportionally supplies high current based on circuit needs or load demands—a common characteristic in wind, solar, and storage energy technologies.

EEE Components, PASSIVES

Würth Elektronik Presents Robust Automotive High-Current Inductors

Posted by doEEEt Media Group
On August 4, 2020
0

The WE-HCIT inductors are robust THT inductors particularly suited for use in vibration-sensitive applications. They are characterized by a high current capability of up to 28 A and a very low RDC (0.44 – 0.88 Ω). WE-HCIT components have very soft saturation behaviour.

EEE Components, PASSIVES

Shielded Flat-Wire High-Current Inductor for Automotive Electronics

Posted by doEEEt Media Group
On August 4, 2020
0

The characteristic features of this flat-wire coil with its MnZn core are its high rated current (IR 38-47 A) and a high saturation performance. At an RDC value of 0.6 to 1.1 Ω, its resistance is lower than that of comparable coils on the market.

EEE Components, PASSIVES

TDK Presentes Robust NTC thermistors for E-mobility

Posted by doEEEt Media Group
On August 3, 2020
0

The NTC sensor is designed for a temperature range of -40°C to +150°C, whereby a temporary load of up to 200°C is permitted. At 25°C the rated resistance is 10 kΩ with a B25/100 value of 3625 K and a tolerance of ±1 percent.

ACTIVES, EEE Components, PASSIVES

EV/HEV On-board Chargers Demand Stricter Requirements

Posted by doEEEt Media Group
On July 21, 2020
0

EV/HEV On-board Chargers Demand Stricter Requirements for Safety Capacitors, also known as interference suppression capacitors, Protect Circuits and People

EEE Components, PASSIVES

Capacitors and Varistors in Automotive EV/HEV Applications

Posted by doEEEt Media Group
On June 4, 2020
0

AVX and Mouser Electronics Tech Chat

In this episode of All About Circuits’ Tech Chats, Chris Anderson sits down with Daniel West of AVX to discuss the unique products AVX offers that provide the performance and durability needed in EVs and HEVs.

Source: AVX,...

EEE Components, PASSIVES

Solutions To Meet The New VW 80808 Passive

Posted by Kemet Electronic Corporation
On May 11, 2020
0

As one of the largest automakers in the world, Volkswagen many times sets the standard for components in that can be used in the automotive industry. Recently, they have introduced the VW80808 standard which can be thought of as similar to the AEC-Q200 standard set forth by the Automotive Engineering Council.

EEE Components, PASSIVES

Solutions To Meet The New VW80808 Standard

Posted by Kemet Electronic Corporation
On May 11, 2020
0

As one of the largest auto makers in the world, Volkswagen many times sets the standard for components in that can be used in the automotive industry. Recently, they have introduced the VW80808 standard which can be thought of as similar to the AEC-Q200 standard set forth by the Automotive Engineering Council.

Page 8 of 9«‹6 789 ›