Potentiometers type 2

Posted by doEEEt Media Group
On January 8, 2020
0

Power potentiometers are as a rule wirewound. They are wound on a ceramic body and lack, due to heat dissipation concerns, encapsulation in casings or housings.

ABC of CLR, EEE Components, PASSIVES

Concepts and Measurements

Posted by doEEEt Media Group
On January 3, 2020
0

The product CR x VR is called the CV product and is a measure of the charge quantity. CR is expressed in µF and VR in volt. The product has the quantity µAs or µC (microCoulomb).

ABC of CLR, EEE Components, PASSIVES

Other Inorganic Dielectrics

Posted by doEEEt Media Group
On January 3, 2020
0

Class 3 ceramics, Glass capacitors and Mica capacitors are other inorganic dielectrics between the electrostatic capacitors in the space market

ABC of CLR, EEE Components, INSPECTION, ELECTRICAL & VERIFICATION, PASSIVES, TESTING

EMC ferrite equivalent circuits

Posted by doEEEt Media Group
On January 2, 2020
0

Losses represent the main impedance component of a ferrite component.

ABC of CLR, EEE Components, INSPECTION, ELECTRICAL & VERIFICATION, PASSIVES, TESTING

SMD Power Inductors

Posted by doEEEt Media Group
On January 2, 2020
0

There are a multitude of SMD Power Inductors construction types available for the different types of application: Magnetically shielded and Unshielded

ABC of CLR, EEE Components, PASSIVES

Equivalent Circuits and Circuit Types of Inductors

Posted by Tomáš Zedníček
On May 3, 2019
0

Modern measuring equipment, such as the HP4195A impedance analyzer and similar instruments, allow computer-aided derivation of equivalent circuits and their optimization. Constant parameters for inductance L, capacitance C, and resistance R are required for the simulation of electronic circuits. An incorrect approach in defining an equivalent circuit leads to flawed or incorrect simulation results.

ABC of CLR, EEE Components, PASSIVES

Comparison Charts of Film & Foil Organic Capacitors

Posted by Tomáš Zedníček
On April 30, 2019
0

Some comparison graphs between different dielectric types of organic capacitors are depicted in this post

ABC of CLR, EEE Components, PASSIVES, PHYSICAL, MECHANICAL & ASSEMBLY, TESTING

Hi-Rel EEE Parts Mounting Techniques Overview

Posted by Tomáš Zedníček
On April 30, 2019
0

IR reflow soldering IR infrared “convection” reflow is commonly used in commercial large volume SMD components mounting process. The main differences in reflow soldering processes and oven types lie in heat transfer methods – radiation, conduction, convection, and condensation. In fact, all heat transfers are used in modern reflow ovens. The heat is applied from above, below, or all directions dependent on the equipment being used. In classical infrared “radiation” reflow ovens, several ceramic heaters are transferring the heat to the assemblies, moving through the oven on a conveyor belt, by radiation.

ABC of CLR, EEE Components, PASSIVES

Pulse Load, Power and Voltage Derating on Resistors

Posted by Tomáš Zedníček
On March 6, 2019
0

PULSE LOADS In many applications, the resistor will be subjected to pulse loads. We make distinctions between periodical/repetitive loads and pulse trains; on one hand, where the pulse is repeated at a certain frequency, and on the other separate pulses where a possible repetition will occur after so long time that the resistor has recovered its original ambient temperature.

ABC of CLR, EEE Components, PASSIVES

Capacitance, Dipoles and Dielectric Absorption

Posted by Tomáš Zedníček
On March 4, 2019
0

The Capacitance is determined by, among other things, the characteristics of the dielectric material. International standards speak of the Dielectric Constant or permittivity, designated by the symbol ε.

Page 4 of 51 2 345