ENDURANCE, ENVIRONMENTAL & RADIATION, WEBINAR

Webinar – Managing EEE Components for LEO and Lower Cost Space Missions

Posted by doEEEt Media Group
On September 10, 2020
0

This webinar will go over some of the challenges of selecting EEE components for lower-cost space missions. It will present the continuing need for radiation tolerance in the components, as well as quality needs. The Renesas line of Radiation-Tolerant and Radiation-Hardened Plastic products will also be discussed, including qualification, screening and assurance testing flows.

ALTER Laboratory Services, EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

Antipattern in EEE Parts Procurement

Posted by David Nuñez Teruel
On August 31, 2020
0

“Managing space parts procurement and parts engineering services purely as a cost center is an outdated mindset that can have drastic repercussions, ranging from the inability to attract the right talent to discouraging the use of critical and expensive service providers.

EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, Microsectioning - Short Technical Notes

Inspection of conformal coating on PCB using UV Light

Posted by Mari Carmen López
On August 4, 2020
0

The aim of the external inspection of coated PCA is to determine if all the surfaces and devices are adequately covered. In order to make easy such inspection, fluorescing agents can be added to the polymeric formulation, which shows a blue glow when the PCA is exposed to ultraviolet (UV) light.

EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, PASSIVES, TESTING

New Whiskers Phenomena?

Posted by doEEEt Media Group
On August 1, 2020
0

Some PCBAs were submitted to a whisker test +85°C 85% RH for 200h duration and additional 2h from +85°C/85% RH-T° +25°C/50% RH 5 Cycles

ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

New Space and the use of Radiation simulation tools

Posted by Amor Romero
On July 9, 2020
0

The use of radiation tools is justified as a complement of radiation test to verify and optimize the radiation hardness assurance process in the new space market and reduce some cost without a significant loss of the confidence level.

EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, MANUFACTURER NOTIFICATION, PASSIVES, TESTING

Updated: Shipment Hold Notification, Vishay Military type RNR55 resistors, MIL-PRF-55182

Posted by Emilio Cano García
On June 9, 2020
0

Shipment Hold Notification- Mil-PRF-55182, VISHAY Style HDN55, Military type RNR55, Columbus, Nebraska Product

ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

What is a Life Test in a Electronic Components?

Posted by Javier Galnares
On June 6, 2020
0

Life test is an electrical stress test that typically employs voltage and/or temperature to accelerate the appearance of wear-out reliability failures in a device. The objective of life testing is to evaluate whether failures caused by wear-out are likely to occur during the product lifetime and thus to estimate compliance of the device with the long-term reliability requirements

ENDURANCE, ENVIRONMENTAL & RADIATION, INSPECTION, ELECTRICAL & VERIFICATION, TESTING

Considering the risk of retinning on QFN package

Posted by Manuel Sánchez Ruiz
On May 19, 2020
0

The use of new packages on space market has come hand in hand with the introduction of commercial of the shelf (COTS) parts in the business and even more with the New Space needs.

ALTER Laboratory Services, ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

RadLab: Radiation Testing Services on Electronics Parts

Posted by doEEEt Media Group
On March 14, 2020
0

Radiation Testing Services – RADLAB Radiation testing (ionizing and nonionizing) effect is one of the main factors affecting the reliability of equipment and systems operating in space. However, there is also a growing interest in it in other technological fields such as avionics, high energy physics, the automotive industry, nuclear industry, etc.

ACTIVES, EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, PHYSICAL, MECHANICAL & ASSEMBLY, TESTING

Hermetic Packages in Space Environment

Posted by Javier Alejandro de la Ossa Fernández
On February 27, 2020
0

The general specification for hybrid microcircuits (MIL-PRF-38534) details the qualification and testing requirements for non-hermetic packages for military and space applications, and the MIL-PRF-38535 proposed class Y monolithic microcircuits for non-hermetic space level.

Page 4 of 9«‹2 345 6 ›»