During this webinar we will go through an overview of the correct designer´s approach for a good EMC Shielding device. The basic rules to follow in order to avoid future noise and integrity problems in housing, board level shielding, cables, RF and sensitive stages,… are easily explained to...
EMC Shielding 101 – Designer’s Approach
- Posted by doEEEt Media Group
- On July 21, 2020
- 0
Würth Elektronik Webinar
Issue 40 of EUROPEAN PREFERRED PARTS LIST (EPPL)
- Posted by Emilio Cano García
- On July 21, 2020
- 0
The changes in issue 39 of EUROPEAN PREFERRED PARTS LISTS (EPPL) are included in the DCR 1310 and detailed in this post
New Generation of Rad-hard Schottky & Rectifiers Diodes for Space
- Posted by Emilio Cano García
- On July 15, 2020
- 0
STMicroelectronics has announced a new generation of Schottky and Rectifiers diodes into his space products. They are available in different hermetic packages and ESCC qualified.
Large Capacitor Banks Charging
- Posted by doEEEt Media Group
- On July 9, 2020
- 0
With large capacitor banks, an inrush current limiter is a necessary component, a MOSFET as a voltage-controlled current device is perfectly suitable to be part of an inrush-current limiter
How to Use ESD/surge Protection Disk Varistors
- Posted by doEEEt Media Group
- On July 9, 2020
- 0
Varistors can be used as suppressors to protect devices and circuits from transient abnormal voltages including an ESD (electrostatic discharge) and a lightning surge
KEMET New SMD Inductor Range Addresses Power Density and Efficiency
- Posted by Kemet Electronic Corporation
- On July 1, 2020
- 0
Devices in the new METCOM series are ideal for developing more efficient DC to DC switching power supplies as well as other power-related applications including EMI filtering.
ISL7x061SEH, ISL7x062SEH load/protection switches
- Posted by doEEEt Media Group
- On June 24, 2020
- 0
Renesas’ radiation-hardened load switches provide a simpler and smaller way to turn on and off your power rails in multi-rail power systems compared to a discrete FET. Load switches are also ideal for redundant power distribution, power sequencing and input-output protection of POL based power distribution systems.
Overload Protection in Satellite Power Systems
- Posted by Emilio Cano García
- On June 15, 2020
- 0
Power Distribution Unit (PDU) in a satellite aims to distribute energy across all subsystems and payloads and prevent the overload of the main power bus. The design of a PDU seeks efficient functionality, achieving a balance of performance, weight and reliability, meeting the mission requirements at the lowest possible cost without risk.
SEL protection for Space Applications
- Posted by Sonia Vargas
- On June 14, 2020
- 4
There are several strategies in order to protect circuits from Single Event Latch-Up. Implementing such protection with Current Limiters is a versatile and programmable option. However, this part types must be evaluated under certain stress sources related to space applications, where a set of electrical parameters are measured during the process. Here are presented the typically used ones.
EMI Filtering for High-Reliability Applications
- Posted by doEEEt Media Group
- On June 3, 2020
- 0
Electromagnetic interference (EMI), or electrical noise, is generated by everything from cellphones to solar flares and can make accurate signal transmission as difficult as trying to have a clear conversation in a noisy room. To improve signal clarity in electronic circuits, device designers turn to EMI suppression filters.