ACTIVES, EEE Components, ENDURANCE, ENVIRONMENTAL & RADIATION, INSPECTION, ELECTRICAL & VERIFICATION, Non-standard testing, TESTING

SiC Schottky Blocking Diode for BepiColombo Solar Array

Posted by doEEEt Media Group
On December 10, 2020
0

Alter Technology as reference test house Screening of a high number of devices under very harsh conditions: Custom testing setup High Temperature: 270ºC Low temp: -170ºC High Voltage tests: 250V High Power tests: 2.5A Long lasting tests with constant monitoring of electrical parameters and temperature of each single diode.

ACTIVES, EEE Components

Power Output Optimization in Switching Regulator

Posted by doEEEt Media Group
On December 9, 2020
0

Board level loads create greater challenges for the voltage regulators that power them. Verifying operation of these regulators requires a different approach and different form factors for test equipment

EEE Components, PASSIVES

When benign is better: fail safe capacitor technology

Posted by doEEEt Media Group
On December 9, 2020
0

For critical applications, a high level of protection is required and usually achieved by combining a fail-safe electrode design, open mode design or floating electrode design, and flex termination.

EEE Components, PASSIVES

Low Temp effects on aluminum electrolytic capacitors

Posted by doEEEt Media Group
On December 8, 2020
0

Offering a higher C per unit area than other dielectric families. ANODE: An high purity aluminum foil, CATHODE: a conductive liquid (electrolyte), DIELECTRIC: an aluminum oxide (Al2O3) layer.

EEE Components, PASSIVES

New Method of Graphene Manufacturing at Scale

Posted by doEEEt Media Group
On December 8, 2020
0

The hyperbole has seen graphene grandiosely described as a wonder material that is going to find transformative applications across the electronics sector.

ACTIVES, EEE Components, PASSIVES

Long-Term Reliability of Self-Balancing Supercapacitors

Posted by doEEEt Media Group
On December 7, 2020
0

Long-Term reliability data of AVX SCM and SCC supercapacitors have been presented in an article published by TimesTech, authored by Eric DeRose, Global Product Manager; Bob Knopsnyder, Senior Development Engineer and Bharat Rawal, Contractor/Retired Manager, BestCap Technology, AVX Corporation.

EEE Components, PASSIVES

Replacing MLCCs with polymer capacitors

Posted by doEEEt Media Group
On December 7, 2020
0

With the continuing supply shortage for multi-layer ceramic capacitors (MLCCs), designers are being forced to consider alternatives. In this article, we will look at the factors to be considered if you’re thinking about using polymer capacitors as a replacement. There has been a supply shortage of MLCCs since the end of 2016 and there are no signs of immediate improvement.

EEE Components, PASSIVES

New type of electrolyte could enhance supercapacitor performance

Posted by doEEEt Media Group
On December 6, 2020
0

Novel class of liquids may open up new possibilities for improving the efficiency and stability of supercapacitors while reducing their flammability

ABC of CLR, EEE Components, INSPECTION, ELECTRICAL & VERIFICATION, PASSIVES, TESTING

Design of optimized EMC filters for real operating environments

Posted by doEEEt Media Group
On December 2, 2020
0

A very convenient method of describing ferrite components is the use of measured dual-gate S parameters

EEE Components, PASSIVES

Automotive requirements to Passive Components – AEC-Q200

Posted by doEEEt Media Group
On December 2, 2020
0

Würth Elektronik Webinar

For automotive application, need a design engineer more information about the used passive component in compared with an industrial application. However, what means if manufacturer declares AEC-Q200? Is that certified? Is that enough for the application? Where is the trust level for such “certificates”? We will answer these and your personal questions...

Page 58 of 109«‹56 575859 60 ›»