Characteristics of X-RAY Inspection

Posted by doEEEt Media Group
On April 26, 2022
0

Radiographic inspection is based on X-ray radiation. This radiation can be produced by accelerating electrons under a certain voltage in a vacuum tube so that they are emitted from a cathode and collide into an anode called ‘target’ producing X-rays.

INSPECTION, ELECTRICAL & VERIFICATION

X-Ray Inspection applied to DPA test

Posted by doEEEt Media Group
On April 26, 2022
0

During the DPA test, parts go through a systematic and detailed examination at different levels of disassembly. It is important to note that DPA is not a test itself, but rather a comprehensive series of tests where parts are examined for a wide variety of design, workmanship, and processing problems.

INSPECTION, ELECTRICAL & VERIFICATION

Constructional Analysis Tests

Posted by doEEEt Media Group
On April 26, 2022
0

Constructional Analysis as a complete service provides a deep understanding of the technologies used during the manufacturing process, information about the construction of their device

INSPECTION, ELECTRICAL & VERIFICATION

Scanning Acoustic Microscopy (SAM) and X-Ray Tomography

Posted by doEEEt Media Group
On April 26, 2022
0

The Scanning Acoustic Microscopy (SAM) technique is the most effective and complete non-destructive approach for the detection of critical and latent anomalies within plastic encapsulated parts, either on assembled or non-assembled systems

Electronic Design Services

Design for Manufacturing and Assembly

Posted by doEEEt Media Group
On April 7, 2022
0

…

Small Sats Testing

Vibration Testing for Small Sats

Posted by doEEEt Media Group
On April 2, 2022
0

Vibration Testing is a very specialized field where Alter Technology is a highly qualified laboratory performing numerous tests in EEE Parts. To do this kind of service, we have extended and qualified laboratory accreditations that bring to your needs secure and safe work. These include the ones related to Small spacecraft and units. The applicable standards are: ISO 19683 refers to ISO 15864. Launcher’s requirements

EEE Components, PASSIVES

Stackpole Releases 2-Watt Pulse Withstanding Chip Resistor

Posted by doEEEt Media Group
On March 29, 2022
0

Stackpole Releases 2-Watt Pulse Withstanding Chip Resistor Power supplies and controls face an increasing level of surge requirements from regulatory bodies as well as internal design requirements.

ACTIVES, EEE Components, PASSIVES

GaN based 300W Ultra High Power Density Adapter; EMC and Filter Design Considerations

Posted by doEEEt Media Group
On March 24, 2022
0

Würth Elektronik Webinar with ON Semiconductor

The presented 300 W Ultra−high Power Density Adapter (UHPD) evaluation board demonstrates ON Semiconductor’s high-performance controllers, drivers and discrete semiconductor content capabilities that enable efficient UHPD designs implementation. This reference design includes the Synchronous PFC boost converter which is operating in the Discontinuous Conduction or Critical Conduction Mode (DCM/...

ACTIVES, EEE Components, PASSIVES

TDK EPCOS Robust Power AC Filter Film Capacitors Design Explained

Posted by doEEEt Media Group
On March 21, 2022
0

AC filter capacitors are supplied with very high power ratings. According to the IEC-61071 standard for capacitors in power electronics, a safety device is mandatory for power capacitors, which activates the capacitors in the event of a fault.

EEE Components, PASSIVES

Wide Bandgap Materials.

Posted by doEEEt Media Group
On March 17, 2022
0

Silicon has been the leading semiconductor material for more than 50 years, and has been one of the primary building blocks of the modern computing and power electronics industries.

Page 22 of 109«‹20 212223 24 ›»