CRANE INTERPOINT NEW MSA+ SERIES 15-50 Vin
- Posted by Manuel Padial Pérez
- On September 3, 2019
- 0
Crane Aerospace & Electronics, “interpoint” has announced the introduction of a new, higher-power DC/DC CONVERTER, the MSA+ series, as a drop in replacement for Crane’s MSA.
The MSA+ DC-DC converters have a power density of 15 watts per cubic inch, magnetic isolation, higher power (6 Watts of output power), wider input voltage range (15 to 50 volt input) and lower output ripple in a 1.13 square inch case (7.31 square centimeter case).
The devices have a compact footprint (available in non-flanged or as an offset flange package for greater board density) and operate over a temperature range of -55°C to +125°C. The hermetically sealed, nickel plated, steel cases are 1.065 × 1.065 × 0.350 inches (27.05 × 27.05 x 8.89 mm) for the standard case.
Samples are already available. If you are interested in this DC/DC CONVERTER, please contact doEEEt team
Lead the Technical Content Maintenance Team of doEEEt platform. at Alter Technology
Manuel Padial has a Degree in Industrial Electronic. Engineering and a Master (M.Eng.)/Advanced Degree in Electrical and Electronic Engineering.
Since 2000 in Alter Technology, as EEE Parts Engineer, first in the Engineering and Materials Management Department, has given technical support to customers in many different space programmes. And later on, as Coordinator of the Parts Engineering and Purchasing Department, has been in charge of guarantee the proper EEE Parts selection/definition/testing to ensure the technical/schedule/budget compliance to projects requirements. Currently and since 2017 is leading the Technical Content Maintenance Team of doEEEt platform.
With the continuous maintenance of the platform technical content, doEEEt provides to the space community the most updated and complete information about Hi-Rel EEE components, related documentation, and reports, as well as any associated procurement and testing activities.
Since 2000 in Alter Technology, as EEE Parts Engineer, first in the Engineering and Materials Management Department, has given technical support to customers in many different space programmes. And later on, as Coordinator of the Parts Engineering and Purchasing Department, has been in charge of guarantee the proper EEE Parts selection/definition/testing to ensure the technical/schedule/budget compliance to projects requirements. Currently and since 2017 is leading the Technical Content Maintenance Team of doEEEt platform.
With the continuous maintenance of the platform technical content, doEEEt provides to the space community the most updated and complete information about Hi-Rel EEE components, related documentation, and reports, as well as any associated procurement and testing activities.
Latest posts by Manuel Padial Pérez (see all)
- Hi-Rel Intermediate bus converter and point of load - December 11, 2021
- ASIC or FPGA, how to choose between them - October 25, 2021
- Ceramic Hermetic DDR2 SDRAM Memory avalaible for Space - September 13, 2021
0 comments on CRANE INTERPOINT NEW MSA+ SERIES 15-50 Vin